Mini-Tech
Advantages
- Re-usable threads for miniature applications
- Eliminates thread stripping problems
- Double ended - assists automatic feeding
- Permits space-saving boss design
Key Features
- Re-usable threads for miniature applications — Mini-Tech lets designers provide threaded connections in tight spaces without sacrificing durability.
- Eliminates thread stripping problems — Because the insert provides its own strong interface, the underlying plastic is less stressed by screw insertion.
- Double-ended design — Helps in automatic feeding during assembly and allows insertion from either end.
- Allows space-saving boss designs — Using Mini-Tech can reduce material bulk around the boss, enabling more compact designs.
Selection of Insert or Stud
ISO Metric
Other materials and lengths possible on quotation.
Specifying an Insert
Boss Design Specification
Hole Preparation
Molded holes are recommended wherever possible. The taper on a molded hole should be 0.5° inclusive and the hole diameter recommended should apply at the point reached by the bottom of the insert. The top of the hole should not be chamfered or counterbored and care must be taken to avoid bell mouthing. Hole diameter tolerance: -0.00 +0.05mm.
Installation
The fastener has been designed for installation using a pre-heating process. Care must be exercised to ensure that the fastener softens but does not melt the plastic. This will avoid any tendency to generate unsightly “flash” around the top of the insert. Excessive pressure should be avoided, since this may result in the insert being forced into the hole without allowing the plastic to soften and flow around the surface profile.
Wall Thickness
A general guide to minimum wall thickness is given in the data table but this will vary depending upon the nature of the plastic. Where thinner walls are required these can often be accommodated, but consultation with the P.S.M Technology Centre or local sales office and pre-production testing is strongly advised.
Performance Data
The complexity of materials and variations in service conditions make it impossible to detail fastener performance for specific applications. Please consult P.S.M Technology Centre or local sales office for specific application advice.
Applications & Use Cases
Mini-Tech inserts are excellent in devices where form factor is critical: handheld electronics, compact enclosures, sensor housings, precision instruments, small appliance parts, or compact medical devices. They allow designers to include durable, serviceable threads in parts too small for conventional inserts, while maintaining high reliability over repeated assemblies.
Enhance Your Assembly with Our Precision Mini-Tech Inserts
Start browsing our products or request a quote today to find the ideal fastening solution for your application.